Cold welding compound for bonding Acrylglas (PMMA), Polycarbonat (PC), Polystyrol (PS), ABS and PETG. The bonding joint is transparent and UV-resistant.
Low-viscous, clear solvent-based adhesive – especially for T-joints and small areas. Generally, a sawed or milled edge of one substrate is being bond at right angles with the original surface of another substrate. Substrates that will be bonded must fit accurately because small gaps will not be filled. Bonding surfaces must be dry and clean, especially free of oil, grease or release agents.
White coloration of the bonding seam is caused by condensed water (especially at lower temperature).